Delete dlink-ng config.

1 files changed, 0 insertions, 166 deletions

diff --git a/dlink-ng/dlink-ng-config.pm b/dlink-ng/dlink-ng-config.pm
deleted file mode 100755
index cfeaf7a..0000000
--- a/dlink-ng/dlink-ng-config.pm
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/usr/bin/perl
-use strict;
-use warnings;
-package dlinkng::config;
-
-# Common config
-our $domain_name = ".net.party.bylan.net";	# DNS-name to append to hostnames (overriden later on for TG-mode)
-our $dlink_def_user = "admin";			# Default user for a factory-default D-Link
-our $dlink_def_ip = "10.90.90.90";		# IP for a factory-default D-Link
-our $dlink_def_mask = "255.255.255.0";		# Mask for a factory-default D-Link
-our $dlink_router_ip = "10.90.90.91";		# IP to use on the router/core
-our $dlink_prefix = "30";			# Prefix to use when setting D-Link IP
-our $dhcp4_proxyprofile = "DHCPv4Proxy";	# DHCPv4 proxy profile to use on IOS-XR
-our $dhcp6_proxyprofile = "DHCPv6Proxy";	# DHCPv6 proxy profile to use on IOS-XR
-our $vrf_prefix = "dlink";			# What to prefix the VRF-number (Thread ID) with
-our $max_threads = 1;				# Max threads to use
-our $dlink_host_suffix = "_DGS-3100";		# Suffix for hostname on the D-Link switches (needed by NMS)
-our $default_coreswos = "ios";			# Default OS on coresw
-our $dlink_lacp_start = '45';			# First port for LACP-group on D-Links
-our $dlink_lacp_end = '48';			# Last port for LACP-group on D-Links
-our $skip_last_port = 0;			# Skip last port -- set up as access port
-our $use_ssh_cisco = 1;				# Use SSH towards Cisco-boxes
-our $use_ssh_dlink = 0;				# Use SSH towards D-Link switches
-our $access_vlan = '3602';			# VLAN to use for skipped port
-
-# Specific config -- just declare empty
-our $cisco_user = "";				# Username used when logging into the swithces
-our $cisco_pass = "";				# Password used when logging into the switches
-our $dhcprelay4_pri = "";			# Primary ip helper-address / ip dhcp relay address
-our $dhcprelay4_sec = "";			# Secondary ip helper-address / ip dhcp relay address
-our $dhcprelay6_pri = "";			# Primary ipv6 dhcp relay
-our $dhcprelay6_sec = "";			# Secondary ipv6 dhcp relay
-our $log_dir = "";				# Path to logfiles
-
-# Placeholders, setting them after all config loaded
-our ($po_config, $last_port_config, $os_regex, $os_info);
-
-# Set variables that relies on all config being loaded
-sub set_variables{
-	# Custom Portchannel-config
-	$po_config = {
-		ios => [
-			"logging event link-status",
-			#"ip access-group end-user-protection in",
-			#"ip directed-broadcast 2000",
-			#"ipv6 nd prefix default 300 300 no-autoconfig",
-			#"ipv6 nd managed-config-flag",
-			#"ipv6 nd other-config-flag",
-			#"ipv6 dhcp relay destination $dhcprelay6_pri",
-			#"ipv6 dhcp relay destination $dhcprelay6_sec"
-		],
-		nx => [
-			"",
-		],
-		xr => [
-			"logging events link-status",
-			"ipv4 directed-broadcast",
-			"ipv6 nd prefix default 300 300 no-autoconfig",
-			"ipv6 nd other-config-flag",
-			"ipv6 nd managed-config-flag",
-		],
-	};
-
-	# Custom last port config
-	$last_port_config = {
-		ios => [
-			"logging event link-status",
-			"switchport mode access",
-			"switchport access vlan $access_vlan",
-			"spanning-tree bpduguard enable",
-		],
-		nx => [
-			"",
-		],
-		xr => [
-			"",
-		],
-	};
-
-	# Define what OS-version a coresw runs
-	# NX, XR, XE, etc
-	# The regex is matched against $coreswip
-	$os_regex = {
-		ios => 'iosbox',
-		nx => 'flexusnexus',
-		xr => 'c01',
-	};
-
-	# Configure settings for each OS
-	$os_info = {
-		ios => {
-			max_sessions => 10,
-		},
-		nx => {
-			# define 64 sessions on nxos
-			# nx-os# conf t
-			# nx-os(config)# feature dhcp
-			# nx-os(config)# line vty
-			# nx-os(config-line)# session-limit 64
-			max_sessions => 50,
-		},
-		xr => {
-			# telnet vrf default ipv4 server max-servers 100 access-list MGNTv4
-			# telnet vrf default ipv6 server max-servers 100 access-list MGNTv6
-			max_sessions => 50,
-		},
-	};
-}
-
-# Load ByLAN related configuration
-sub load_bylan_config{
-	# Define bylan-dir, and add it to %INC
-	my $bylan_dir;
-	BEGIN {
-		use FindBin;
-		$bylan_dir = "$FindBin::Bin"; # Assume working-folder is the path where this script resides
-	}
-	use lib $bylan_dir;
-	use bylan;
-	use Getopt::Long;
-	
-	# Load config
-	my $config_file = "$bylan_dir/bylan.conf";
-	my $conf = Config::General->new(
-		-ConfigFile => $config_file,
-		-InterPolateVars => 1);
-	my %config = $conf->getall;
-	
-	# Options
-	$cisco_user = "$config{switches}->{user}";		# Username used when logging into the swithces
-	$cisco_pass = "$config{switches}->{pw}";		# Password used when logging into the switches
-	$dhcprelay4_pri = "$config{servers}->{dhcp1_ipv4}";	# Primary ip helper-address / ip dhcp relay address
-	$dhcprelay4_sec = "$config{servers}->{dhcp2_ipv4}";	# Secondary ip helper-address / ip dhcp relay address
-	$dhcprelay6_pri = "$config{servers}->{dhcp1_ipv6}";	# Primary ipv6 dhcp relay
-	$dhcprelay6_sec = "$config{servers}->{dhcp2_ipv6}";	# Secondary ipv6 dhcp relay
-	$log_dir = "$bylan_dir/logs/telnet";			# Path to logfiles
-}
-
-# Load TG related configuration
-sub load_tg_config{
-	my $tg_dir = '/root/tgmanage';
-	BEGIN {
-	        require "$tg_dir/include/config.pm";
-	        eval {
-	                require "$tg_dir/include/config.local.pm";
-	        };
-	}
-
-	# Options
-	$cisco_user = "$nms::config::ios_user";		# Username used when logging into the swithces
-	$cisco_pass = "$nms::config::ios_pass";		# Password used when logging into the switches
-	$domain_name = ".infra.$nms::config::tgname.gathering.org";	# DNS-name to append to hostnames
-	$dhcprelay4_pri = "$nms::config::dhcp_server1";	# Primary ip helper-address / ip dhcp relay address
-	$dhcprelay4_sec = "$nms::config::dhcp_server2";	# Secondary ip helper-address / ip dhcp relay address
-	$log_dir = "$tg_dir/dlink-ng/log";		# Path to logfiles	
-}
-
-# Uncomment the one you want
-#load_bylan_config();
-#load_tg_config();
-
-# Set last variables that depend on the config above being set
-set_variables();
-
-
-1;